*Conditions of Supply. 

Bank transfer is preferred,   credit cards are exepted with 1.8% fee  ( Master & Visa )

1. •The displayed prices in this web site include:
   

   1. ◦All certificates of compliance as required.

   2. ◦Removal and disposal of all packaging.

   3. ◦All the prices above are based on a domestic “back to back” single story install.

   4. Please click here to view meaning of back to back and cost of non standard installs

2. •Conditions of installation:

   1.       ◦Installation vehicle, equipment and installation team must have clear and unhindered access to the site and internal/external location.
      ◦Head unit will be mounted on a perimeter wall with nothing under the head unit ( window ect) ( mounting above a window is possible,
        but may cost more as more materials are used)
      ◦Piping supplied will be up to 3 m and ducting up to 2m, Extra length is as follows.$35.00 per meter out of duct.
        $55 per meter in duct $16.50 for 90deg bends / extra wall -ceiling caps
   2.          ◦Wall is either brick or fibro, If the wall is Concrete or besser-brick core drilling fees apply ( usually $220 inc ) 
      ◦Hole will be sealed with acrylic filler and end cap installed, over the hole.
      ◦2.5kw to 4.4kw)Wiring included in the installation will be up to 15m to general power circuit
      ◦(5kw to 9kw)Wiring included will be up to 25m to switchboard ( in accessible roof space or accessible under the house, with a new
        circuit breaker installed ( if under house +$2.20 per 1m of conduit & saddles)
      ◦Rubber pads will be supplied for hard, flat surfaces otherwise ( poly slab base $33, extra wall brackets $75 extra
      ◦If out door unit (greater than 3.5kw ) needs to be mounted up high above 1.5m, there is a $88 fee for the Material lifter hire.
      ◦When running piping behind the outdoor unit, piping / cabling will be zip tied to the back of the unit unless notified otherwise.
      ◦Drainage will be run up to 4m, from head unit
      ◦We will refuse installation if we suspect inside or outside wall are made of asbestos, it is the owners or managing agents responsibility to do relevent
   3.           testing to make sure the walls are asbestos free, we will do our best not to ever disturb asbestos walls on purpose, if this happens by accident, we accept no liability. 
   4.          ◦(Supplier – Snap Air Conditioning)
                 The Customer must pay the Supplier the total amount set out in the invoice within fourteen (14) days from the date of the invoice.           
                 The Supplier may charge interest at 2.5% per calendar month on amounts not paid within the time specified   
                 The Customer must pay to the Supplier any costs, expenses or losses incurred by the Supplier as a result of the Customer’s 
                 failure to pay the Supplier all sums outstanding as owed by the Customer to the Supplier including without limiting the generality 
                 of the forgoing any debt collection and legal costs incurred in enforcing payment on a Solicitor and own client basis. 
                The Customer also authorizes the Supplier to make enquiries with respect to the Customer’s credit worthiness, to exchange
                 information with other Credit Providers in respect to previous defaults of the Customer and to notify other Credit Providers of  a
                 default by the Customer.